With the gradual popularization of foam engraving machine, this industry is also gradually known by the society. Through this article, we will learn about the programming steps of CNC foam engraving machine.
Co2 laser engraving and cutting machine,40W Co2 Laser Engraving Cutting Machine,Cnc Laser Engraving Machine.
First, we need to save the CAD drawings to be processed as DXF files, then open the processing files, find the drawings to be moved at different levels, select the drawings and do not let go, input the spatial coordinates, select all the drawings, and zoom in to get the point set. Then create the tool path according to the actual needs, select the cutting method, which can be used for two-dimensional cutting or three-dimensional cutting. Confirm to save the file, select the tool size, and select the machining method. Right click to simulate the output tool path or increase the hierarchical multi tool path selection graph, split and select the machining sequence, and then right click to change the tool path. F8 is the simulation point. Click F8 again to cancel the simulation point. F9 is to turn on the working principle of the machine and turn on the water spray and air jet switches.
The following describes the steps to control the machine tool through the program operation of the machine tool. First, turn on the power, press the red button, and then click to return to the mechanical origin. After all are zero points, turn off the point operation to read the workpiece. The origin is one to many. Before machining, place the workpiece on the platform to ensure that the workpiece is clamped before starting to work. Start the water jet operation through the F9 switch. Adjust the horizontal depth of the cutter of the CNC foam engraving machine so that the workpiece is in the right position to be machined without losing the plastic console of the machine. Pay attention to the NC engraving and operation. Before operation, be sure to return the cutter to the mechanical origin, and pay attention to, Use a small cutter to adjust the parameters, so as to ensure accuracy.
