The laser engraving machine with different power wattage can produce different effects on the workpiece. The greater the power, the deeper and faster the laser engraving machine will generally produce. However, the specific effect is still subject to the sample, because the larger the power of some materials, the deeper the engraving will not be.
Co2 laser engraving and cutting machine,40W Co2 Laser Engraving Cutting Machine,Cnc Laser Engraving Machine.
60W characteristics: For engraving, 2mm depth can be carved for materials with small density, and 6mm thickness can be cut for materials with small density (not all non-metallic materials can reach the above cutting and engraving data, and there are different limit engraving depth and cutting depth for different plates and hardness, please know)
The following are engraving parameters of some non-metallic materials: Please refer to
The following parameters can be adjusted according to the material to exceed the maximum power and minimum power
Leather series: engraving power (10-30) speed (260-350) cutting power (15-65) speed (5-20)
Paper series: engraving power (about 10) speed (above 300) cutting power (5-15) speed (about 20)
Fabric series: engraving power (about 10) speed (about 300) cutting power (5-20) speed (above 10-30)
Wood board series: engraving power (about 10), speed (about 300), cutting power (15-80), speed (5-20)
Marble shadow carving: carving power (about 15), speed (about 300)
Acrylic: engraving power (about 10-20) speed (200-300) cutting power (40) speed (10-20)
Engraving: engraving power (20-25) speed (150-300)
Glass series: engraving power (about 10), speed (180-300)
Double color plate series: (special double color plate for laser machine is required) Engraving power (about 10-20) Speed (200-300) Cutting power (20-50) Speed (10-20)
The above is the engraving power and speed of roughly non-metallic materials. If there are similar materials, the power can be adjusted, subject to the specific actual power and speed. Note: When using, the current should be controlled within 80 as far as possible, which will help protect the laser tube and prolong its service life!
